Description
Product details
MYK Arment Waterproofing Chemical Brand Myk Usage/Application Waterproofing Chemicals Packaging Size 20 Kg Form Liquid Coverage Area 1 Liter of Super Latex Will Cover 70 - 80 Squire Feet Area in 2 Coats For a Proportion mix Shelf Life 24 Month Dry Solid Content In %=48 +/- 1 Color White Emulsion Specific Gravity - 1.03 +/- 0.02 Nature Styrene Butadiene Rubber Polymer Minimum Order Quantity 20 Pack We are one of the foremost firms of MYK Arment Waterproofing Chemical. Besides, we present this product at nominal rates to our customers. Product Description: AquaArm Bond Latex is a SBR based liquid for high performance applications in waterproofing and repairs. Uses: As a bonding agent for the following Plaster to plaster Concrete to concrete Plaster over brick masonry As a additive for waterproof plaster To repair Plaster cracks more than 5 mm As a coating for prevention of corrosion in rebars Mixed with cements Features and Benefits: Excellent Coverage -70-80 sqft per litre / in 2 coats, hence economical Less material wastage- material does not fall back /rebound, when used as bonding agent High Bond Strength Prevents leakage & dampness Enhances strength of a repair mortar & provides durability Application Method: Surface Preparation: Surface for treatments must be thoroughly cleaned of all laitance, loose material, oils, grease, etc. Mechanical means such as wire brushing, shot blasting can be used and finally vacuum cleaned of all loose solids and liquids. Before application ensure that the surface is damp with water but in a touch dry condition. As Bonding Agent: Plaster to plaster• Concrete to concrete• For plaster over brick masonry Mixing ratio:(AquaArm Bond Latex: water: cement): 1:4:7) As waterproof repair plaster: Method of Application: Mix 1 litre of AquaArm Bond Latex with pre-measured water for 50 liter of cement. Use this mix to add to the recommended dry plaster mixes Plaster mixes may be as rich as 1:3 (cement: sand) Keep water-cement ratio in Plaster as low as 0.4 but not more than 0.45 For better application apply a bond coat with AquaArm Bond Latex as suggested earlier 2nd and final layer of plaster must not be mixed with AquaArm Bond Latex Take care to scratch-key the 1st coat surface for mechanical key and effective bond with the 2nd coat Health & Safety Strictly do not dilute beyond recommendation To be applied over damp substrate but in a dry to touch state Not suggested for use in very critical concrete repairs Waterproof coats with AquaArm Bond Latex must be protected with screeds/plasters When applying as a bond coat, if it becomes dry, re-apply to reach a tacky state for overlay of concrete or mortar 2nd coat of plaster with AquaArm Bond Latex may cause a problem in external painting of the surface
